Web Smart Managed PoE Switches User Manual
2.2 Connect Computer (NIC) to the Switch
After installing the network card driver, insert the NIC into the computer. Connect
one end of the twisted pair to the RJ45 jack on your computer, and connect the
other end to any RJ45 port of the Switch, with a maximum distance of 100 meters
between the Switch and the computer. Once the connection is OK and the devices
power on normally, the LINK/ACT/Speed status indicator lights, corresponding to
ports on the Switch.
2.3 Switch connection to the PD (excluding 508834)
On PoE models, any ports that have a PoE indicator also have the PoE power supply
function, which makes it possible to provide power to PD devices such as VoIP
phones, network cameras, wireless access points and more. You only need to
connect the Switch PoE port directly to the PD with a network cable.
12