Setting Isp Parameters; Figure 5-2. Internet Access Wizard Isp Parameters Window - NETGEAR RT338 Reference Manual

Reference Guide for the Model RT338 ISDN Router
If the ISDN Test fails:
• Check the physical connection between your router and the ISDN jack.
• Recheck your directory numbers, SPIDs, and switch type.
• Check that you entered the directory numbers in the local dialing format. Do not enter the area
code unless it is required for local dialing.
If your switch is running the National ISDN (NI-1) protocol, select National ISDN rather than the
switch model (Nortel, AT&T).

Setting ISP Parameters

The next configuration window in the Internet Access Wizard is the ISP Parameters window, shown
in Figure 5-2. The information in this screen is provided by your Internet service provider (ISP).
Figure 5-2. Internet Access Wizard ISP Parameters Window
5-4 Using FirstGear to Configure Internet Access