Ethernet Tab; Figure 5-8. Ethernet Tab - NETGEAR RT338 Reference Manual

Ethernet Tab

The Ethernet tab shown in
port.
Figure 5-8. Ethernet Tab
Table 5-6 lists and describes the fields of the Ethernet tab.
Table 5-6. Ethernet Tab Fields
Field
IP Address
Subnet Mask
Using FirstGear to Configure Internet Access
Figure 5-8 contains the configuration information for the local Ethernet
Description
Enter the IP address of the LAN interface of the router in dotted-decimal notation
(four decimal numbers, between 0 and 255, separated by periods, for example,
192.168.135.5). Every device on the TCP/IP network must have a unique IP
address. If you are using NAT, the IP address is not the address assigned to you by
your ISP.
Enter the subnetwork mask for the router. Unless you have a special need for
subnetting, use the default subnet mask calculated by the router. All hosts on the
LAN segment should use the same mask.
Reference Guide for the Model RT338 ISDN Router
5-17