NETGEAR RT328 Installation Manual

Hide thumbs Also See for RT328:

Table of Contents

Need help?

Do you have a question about the RT328 and is the answer not in the manual?

Page 2: Start Here
Refer to this diagram to identify all of the ports on the router when you attempt to make any connections. The Model RT328 router has an AUI port and one UTP LAN port. The Model RH348 router has four UTP LAN ports.
Page 3: Setup And Preparation
• Your directory number(s) Connect the router to a power source, to your local area network (LAN), and to your ISDN line as shown in the Model RT328 router or • For North America only, your service proﬁle identiﬁer the Model RH348 router installation diagram in the “Hardware numbers (SPIDs) Installation”...
Page 4: Launching Firstgear
For more information about installing your router, refer to Reference • Gateway (enter the IP address of the router) Guide for the Model RT328 and Model RH348 ISDN Routers and • DNS server addresses (enter IP addresses provided by your ISP) Getting Started Using FirstGear for the Model RT328 and Model RH348 ISDN Routers.
Page 5 Canadian Department of Communications Radio Interference Regulations This digital apparatus (Model RT328 ISDN Router and Model RH348 ISDN Router) do not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

Rh348