Table of Contents
Advertisement
Copy the "SDCP366.EXE" to the current directory.
C>SDCP366
When the above command is executed, the message shown below appears on the screen for entering a
segment option document file name.
*** Please input SOG document file name ***
Input File Name == c3xxxyyy.sdc
Next, enter an output file name.
*** Please output SOG HEX file name ***
Output File Name == cpxxxyyy.osa
The following message is displayed after the segment option PROM HEX file (CPxxxyyy.OSA) is
generated.
Making file is completed
Close the MS-DOS prompt window.
The S5U1C6P366Y1 package contains the following files:
• SDCP366.EXE (Segment Option Data Converter executable file)
• CP366SEG.SDC (Recommended segment option document file)
• CP366SEG.OSA (Recommended segment option PROM HEX data file)
Refer to Section 4.7.4 "Segment option", for recommended segment option.
S1C6P366 TECHNICAL MANUAL
APPENDIX A PROM PROGRAMMING
EPSON
151
Advertisement
Table of Contents
