Mercedes-Benz V-Class 2020 Owner's Manual page 323

320 Wheels and tyres
Partially laden vehicle
Tyres/disk Front axle
wheel
245/45 R 18 290 kPa (2.9
XL 100V bar/42 psi)
245/45 R 18 280 kPa (2.8
XL 100W bar/41 psi)
245/45 R 19 230 kPa (2.3
XL 102Y bar/33 psi)
245/45 R 19 260 kPa (2.6
XL 102W bar/38 psi)
Vehicles with a gross vehicle weight of
3,200 kg
The following tyre pressure values apply to the
following vehicles:
with a gross vehicle weight of 3,200 kg
R
with a permissible axle load of 1,650 kg on
R
the rear axle
Partially laden vehicle
Tyres/disk Front axle
wheel
225/55 R 17 C 320 kPa (3.2
bar/46 psi)
235/55 R 17 270 kPa (2.7
XL 103W/V bar/39 psi)
245/45 R 19 230 kPa (2.3
XL 102Y bar/33 psi)
245/45 R 19 270 kPa (2.7
XL 102W bar/39 psi)
Checking the tyre pressure manually
Read the recommended tyre pressure for the
#
current operating condition from the tyre
pressure table or the tyre and load informa‐
tion table. When doing so, observe the notes
on tyre pressure.
Remove the valve cap of the tyre to be
#
checked.
Press the tyre pressure gauge securely onto
#
the valve.
The tyre pressures for the partially laden vehicle are not valid for the Marco Polo with integrated kitchen.
1
1
Rear axle
270 kPa (2.7 bar/39
psi)
260 kPa (2.6 bar/38
psi)
230 kPa (2.3 bar/33
psi)
260 kPa (2.6 bar/38
psi)
with 4x4 all-wheel drive
R
the tyres referred to under "Wheel and tyre
R
combinations" (
1
Rear axle
310 kPa (3.1 bar/45
psi)
250 kPa (2.5 bar/36
psi)
230 kPa (2.3 bar/33
psi)
270 kPa (2.7 bar/39
psi)
Read the tyre pressure.
#
If the tyre pressure is lower than the recom‐
#
mended value, increase the tyre pressure to
the recommended value.
If the tyre pressure is higher than the recom‐
#
mended value, release air. To do so, press
down the metal pin in the valve using the tip
of a pen, for example. Then check the tyre
pressure again using the tyre pressure gauge.
Screw the valve cap onto the valve.
#
Fully laden vehicle
Front axle Rear axle
330 kPa (3.3 330 kPa (3.3
bar/48 psi) bar/48 psi)
320 kPa (3.2 330 kPa (3.3
bar/46 psi) bar/48 psi)
260 kPa (2.6 270 kPa (2.7
bar/38 psi) bar/39 psi)
290 kPa (2.9 300 kPa (3.0
bar/42 psi) bar/44 psi)
page 328)
/
Fully laden vehicle
Front axle Rear axle
350 kPa (3.5 440 kPa (4.4
bar/51 psi) bar/64 psi)
280 kPa (2.8 310 kPa (3.1
bar/41 psi) bar/45 psi)
260 kPa (2.6 280 kPa (2.8
bar/38 psi) bar/41 psi)
290 kPa (2.9 310 kPa (3.1
bar/42 psi) bar/45 psi)