Table of Contents
Advertisement
100 Seats and stowage
Push the rear seats back fully or, if necessary,
#
remove them.
Lift off both covers
#
using a suitable tool, e.g. a screwdriver.
Press both covers
1
#
remove them from the guide rail.
The openings in the rail for the middle slide
on the underside of the folding table will be
open.
Rotate the folding table until the arrow on the
#
underside of the folding table is pointing in
the direction of travel.
Installation position
Insert the folding table into guide rails
#
that arrows
3
on the folding table point to
both markings
4
The guides and sliding rail on the underside of
the folding table fit into the guide rail.
1
from the guide rail
together slightly and
2
on guide rail 2.
Pull lever
5
#
folding table upwards and push the folding
table backwards.
Press both covers
engage them in the openings of the guide rails.
Moving the folding table
Keep lever
#
table into the desired position.
Release lever 5.
#
Move the folding table until it automatically
#
engages in the next possible position.
After repositioning the table, ensure that the
#
folding table is properly secured again.
Removing the folding table
Fold in the table panels and retract the table.
#
Push the rear seats back fully or, if necessary,
#
remove them.
Push the folding table back far enough so that
#
covers
1
removed.
Lift off both covers
#
using a suitable tool, e.g. a screwdriver.
so
Press both covers
#
remove them from guide rail 2.
The openings in the rail for the middle slide
on the underside of the folding table will be
open.
Push the folding table forwards into the
#
installation position.
Arrows
3
markings
4
Lift the folding table out of guide rail 2.
#
on the front or rear side of the
1
together slightly and
5
pulled and move the folding
of the openings in the rail can be
1
from the guide rail
1
together slightly and
on the folding table point to both
on guide rail 2.
Advertisement
Table of Contents
