Mercedes-Benz V-Class 2020 Owner's Manual page 138

Press the a button.
#
The preselection period will be deactivated
and the time will be shown on display section
3.
Operating the auxiliary heating by remote
control (auxiliary warm-air heater)
You can switch the auxiliary heating on and off as
well as set the operating duration with a remote
control. The remote control must be synchron‐
ised with the auxiliary heating system receiver.
For more information, please contact a qualified
specialist workshop.
Store the remote control for the auxiliary heating
such that the auxiliary heating function cannot be
switched on unintentionally. In particular, ensure
that the remote control is kept out of the reach of
children.
The remote control has a range of approximately
300 m. The range is reduced by sources of radio
interference or solid objects, for example.
1
Indicator lamps
2
Confirms settings
3
Switches the remote control on/off
Changing the operating duration or cancel‐
ling or terminating settings
Indicator lamp 1 lights up in various ways to
show different operating modes:
Lights up red – remote control switched on
R
Flashes red – auxiliary heating switched off
R
Lights up green – auxiliary heating switched
R
on
Flashes green – change operating duration
R
option active
Flashes alternately red and green – remote
R
control in synchronising mode
When the remote control battery is weak, indica‐
tor lamp 1 will flash red rapidly.
Replace the remote control battery
#
( page 135).
/
%
You can find further information on lamp sta‐
tuses under "Problems with the auxiliary
heating" .
Switching the remote control on/off
The remote control will switch to standby mode
after ten seconds. Indicator lamp
To switch on: press and hold the Ü but‐
#
ton until indicator lamp
To switch off: press and hold button Ü
#
until indicator lamp
Switching auxiliary heating on and off
Switch on the remote control.
#
To switch on: when indicator lamp
#
flashes red, press the a button.
During data transfer, indicator lamp
light up red.
When indicator lamp
auxiliary heating is switched on.
To switch off: when indicator lamp
#
up green, press the a button.
During data transfer, indicator lamp
light up red.
When indicator lamp
iliary heating is switched off.
Changing the operating duration
Switch on the remote control.
#
When indicator lamp
#
the Ü and a buttons simultaneously.
Indicator lamp 1
Press the Ü button repeatedly until the
#
desired operating duration is shown.
20 minutes – indicator lamp
R
green twice.
30 minutes – indicator lamp
R
green three times.
40 minutes – indicator lamp
R
green four times.
Press the a button.
#
During data transfer, indicator lamp
light up red.
When indicator lamp
green flashes, the selected operating duration
is stored.
Climate control 135
1 will go out.
1 lights up red.
1 goes out.
1
1 will
1 lights up green, the
1 lights
1 will
1 flashes red, the aux‐
1 flashes red, press
will flash green.
1 will flash
1 will flash
1 will flash
1 will
1 emits two long,