Table of Contents
Advertisement
Replacing front light bulbs (vehicles with hal‐
ogen headlamps)
Overview of front light source types
1
Additional turn signal lamp on the outside
mirror: LED
2
Turn signal light: PY 21 W
3
Low beam: H7 55 W
4
High beam/standing/parking lights/daytime
running lights: H15 55 W/15 W
Replacing light sources in the headlamp
Requirements
The lighting system is switched off.
R
The appropriate front wheel is turned
R
inwards.
Low beam: you require a H7 55 W light bulb.
R
Turn signal light: you require a PY 21 W light
R
bulb.
High beam / standing/parking lights /
R
daytime running lights: you require a
H15 55 W/15 W light bulb.
Fitting/removing the cover in the front wheel
arch
To remove: grip the centre of cover 1, slide
#
it upwards and pull it out.
The cover will hang downwards on the strap.
To fit: insert cover
#
downwards until it engages.
Low beam
Remove the cover in the front wheel arch.
#
Turn housing cover
#
remove it.
Turn socket
2
for low beam to the left and
#
pull it out.
Pull the bulb out of socket 2.
#
Insert the new bulb into socket 2.
#
Insert socket
2
and rotate it to the right to
#
tighten it.
Press on housing cover
#
the right to tighten it.
Replace the cover in the front wheel arch.
#
Light and vision 113
1
at the top and slide it
1
anti-clockwise and
1
and rotate it to
Advertisement
Table of Contents
