Table of Contents
Advertisement
PRESYS
Instruments
Another way of performing automatic documented calibrations is by means of the
ISOPLAN Calibration Software for PC/WindowsTM, which uses RS-232 or RS-485 serial
communication to connect the computer to the dry block. With ISOPLAN software it is
possible to register sensors and instruments of a factory, generate work orders, create
and print management to the calibration environment.
The TE-25N, TE-35N and TE-50N models has also many other features, such as:
• The electric signal calibrator is independent from the dry block function.
• Internal buzzer beeps when the temperature reaches the desired value.
• Keypad that eases the operation and configuration of the calibrator.
• Graphic liquid crystal display to present big-size digit numbers.
• Thermoelement reading scaled to ITS-90 or IPTS-68.
• Internal regulated 24 Vdc power supply for 2-wire transmitters.
• Internal rechargeable battery and battery charger included in the electric
signal calibrator.
• Independent circuitry for over-temperature protection and safety.
• Insert to choose, strap and test leads included.
Page 4
TE -25N / TE-35N / TE-50N
Advertisement
Table of Contents
