Wireless Confi Guration - NetComm NB9 User Manual

Wireless Confi guration
To enter advanced settings for the wireless network hosted by the NB9W, click on Wireless > Confi guration:
Many of these fi elds may not need to be altered and may require interpretation by a network engineer.
Field Name
AP Isolation
Band
Channel
Rate
Multicast Rate
Basic Rate
NB9/NB9W ADSL2+ VoIP Router
YML790 Rev1
About
'On': 'wireless clients associated with the access point will only be able to
communicate with the Access Point
'Off': wireless clients associated with the Access Point will be able to
connect to each other 'peer-to-peer
[Not alterable by end-user]
The default channel is 11. The 802.11b/g network is divided into 14
channels in Australia. Each channel broadcasts on a slightly different
frequency; if you are getting interference from adjacent wireless networks,
make a note of the channels that these are operating on and change your
channel accordingly. For best compatibility, only use channel 1 to 11 as
some wireless client does not work on channel 12 and 13.
Default rate is 'Auto' and operates at the 54 Mbps data rate when possible
but drops to lower rates when necessary, dependent on signal strength and
the capacity of the client stations.
Leave at default setting 'Auto' unless there is a specifi c requirement for
multicast.
Leave as default
41