Function; Assembly - Festo DNCKE S Series Operating Instructions Manual

Function

1 DNCKE-...-S
Fig. 2
6 Function
Pressurising with compressed air on the supply port 2 (è Fig.1) opens the internal clamping com-
ponent through a pneumatically driven release mechanism. The round material can then move freely.
Fig. 3
If the supply port is exhausted, a spring-loaded mechanism generates the clamping force of the clamp-
ing component. The round material is then clamped.
Fig. 4
7

Assembly

Requirements
NOTICE!
Lateral loads and bending moments exerted on the round material damage its function and destroy
the internal clamping component.
• Load the round material only in the direction of movement. The use of a self-aligning rod coupler
(è 3 Further information) prevents lateral forces.
Festo — DNCKE-...-S / KEC-...-S — 2020-10e
2 KEC-...-S
7