Notes On The Documentation; Notes On The Mechanical Surface Mounting - Eaton PowerXL DX-NET-PROFINET-2 Manual

3 Installation

3.2 Notes on the documentation

3.2 Notes on the documentation

3.3 Notes on the mechanical surface mounting

16
Documents containing installation instructions:
• IL4020010Z instruction leaflet for DA1 variable frequency drive
in size FS2 and FS3
• IL4020011Z instruction leaflet for DA1 variable frequency drive
from size FS4
These documents are also available as PDF files on the Eaton Internet
website. They can be quickly located at
www.eaton.com/moeller
by entering the document number as the search term.

DANGER
Make sure that the equipment is fully de-energized when
performing the handling and installation work required to
mechanically set up and install the field bus connection.
￫
When installing the DX-NET-PROFINET-2 field bus connection, it
will be necessary to open the DA1 variable frequency drive's
enclosure. We recommend that this mounting work be carried
out before the electrical installation of the variable frequency
drive.

D C -
L1 /L L2 /N
L3
Figure 7: Make sure that the equipment is de-energized
when performing installation work
DX-NET-PROFINET-2 09/13 MN04012007Z-EN www.eaton.com
￫ Support