Table 1 Dxi6900 G1 Node - Front Panel Led Indicators, Buttons, And - Quantum DXi6900 Field Service Manual

Table 1 DXi6900 G1 Node -
Front Panel LED Indicators,
Buttons, and Connectors
Indicator, Button, or
Item Connector
1 Power-on indicator,
power button
2 System identification
button
3 Video connector
4
LCD menu buttons
Quantum DXi6900 G1 User's Guide
Icon Description
The power-on indicator lights when the system
power is on. The power button controls the
power supply output to the system.
Warning: Turning off the power removes the
Caution: Turning off the power without properly
Note: To shut down the Node in the event of an
emergency, press and hold the power
button for 4 seconds. Warning: This may
result in data loss and may cause a delay
on next startup due to a blockpool verify
operation.
Press to toggle the system ID on and off.
The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the LCD panel on the front and the
system status indicator on the back flashes until
one of the buttons is pressed again.
Allows you to connect a VGA display to the
system.
Not used.
Chapter 1: Basic Operations
main power but keeps standby power
supplied to the Node. Because of this,
you must unplug the Node before
servicing unless you are replacing a
hot-swappable part (see
Swappable Parts on page 76).
shutting down the system may result in
loss of data (see Turning On and
Shutting Down the System
page 23).
DXi6900 G1 Node
Hot-
on
5