Faults - Krautzberger A 16 Operating Instructions Manual

9 Faults

Personnel:
n Qualified personnel
If the fault is not included in the following tables or if it cannot be eliminated with the measures
described, contact Krautzberger Customer Care.
Fault table
Spray pattern
GB–38
Operating instructions
Error
Normal flat jet spray pattern
Spray pattern too
heavy towards the top
and towards the
bottom
Spray pattern concen-
trated on the left or
right side
Heavy application in
the centre of the spray
pattern
Split spray pattern
Cause
n Dirty air nozzle
n Dirty material
nozzle
n Dirty air nozzle
n Dirty material
nozzle
n Too much mate-
rial
n Material too thick
n Insufficient mate-
rial
n Flat jet air pres-
sure too high
mail@krautzberger.com, www.krautzberger.com
T-Dok-700-GB-Rev.0
Remedy
n Clean the nozzles
Ä Chapter 8.3
(
'Cleaning the
automatic spray
gun' on page 30).
n Clean the nozzles
Ä Chapter 8.3
(
'Cleaning the
automatic spray
gun' on page 30).
n Reduce the mate-
rial supply
n Thin the material
n Increase the
material supply
n Reduce the flat jet
air pressure