Delta RPI M80U Operation And Installation Manual page 15

The following Figure 2-3 shows the rating labels of M80U / M80A and the table
(Table 2-2) along with these labels explains the definition of the specific mark.
Figure 2-4 illustrates the layout of wiring box of M80U / M80A and the table
(Table 2-3) along with this layout describes the detail of each area.
This compartment includes inverter inputs (DC), outputs (AC), surge protection
device (SPD), fuse holder, DC switch and the communication connection such
as RS-485.
Symbol
FCC designation
Please read the user manual for further information
Danger : Electrical Hazard
Danger : Electrical Hazard for the isolation duration
Warning of the hot surface of the inverter
ETL Listed Mark approved by Intertek Lab
Table 2-2 : Rating label explanation of M80U / M80A
Figure 2-3 : Rating labels of M80U / M80A
Definition
15
Introduction