Transmission, Drive Wheel, Load Wheel; Drive Wheel; Transmission - Big Joe E30 Operation, Maintenance And Parts Manual

7-1. Drive Wheel.

1. Turn off the key switch (20,
emergency disconnect (17).
2. Remove the lower compartment covers as
described in paragraph
3. Jack up the truck so the drive wheel is off the
ground; then securely block the truck to prevent
movement.
4. Disconnect cables (3 and 4,
drive motor.
5. Remove five screws (23,
ers (24), and free motor (33) with drive wheel (31)
from housing (8).
6. Remove the six screws (26), six lock washers (27)
and gear (21).
7. Remove drive wheel (31) from motor (33).
8. Remove bearing (30) from wheel (31).
9. Install new drive wheel in reverse order of
removal.
10. Install the lower
described in paragraph
BL-E30-0515 - 03-01-2018
SECTION 7

TRANSMISSION, DRIVE WHEEL, LOAD WHEEL

Figure 12-18) and
5-3.
Figure 12-22) from
Figure 7-1), lock wash-
compartment covers
5-3.
11. Turn on the key switch (20,
emergency disconnect (17).

7-2. Transmission.

1. Turn off the key switch 20,
emergency disconnect (17).
2. Remove the lower compartment covers as
described in paragraph
3. Remove the brake (35,
in paragraph
4. Remove the steering arm as described in para-
graph 5-4.2.
5. Remove two screws (3,
(4).
6. Remove five screws (1), five lock washers (2) and
bracket (5) from housing (8,
7. Support the housing (8,
bolt (2) and plate (3)
8. Free housing (8) from frame (5).
9. Remove plate (7) from housing (8).
as
10. Install new transmission by reversing the steps
above.
Figure
Figure
5-3.
Figure 7-1) as described
6-1.1.
Figure 12-1) and plate
Figure 7-1).
Figure 7-1) and remove
12-18) and
12-18) and
7-1