Big Joe E30 Operation, Maintenance And Parts Manual page 25

Parameter
DRIVE MENU
Accel Max Speed
Accel Min Speed
Decel High Speed
Decel Low Speed
Rev Accel Max Speed
Rev Accel Min Speed
Rev Decel High Speed
BL-E30-0515 - 03-01-2018
Table 4-2 Programmable Parameters
Factory Setting
70A 90A
Sets the rate (in seconds) at which the speed command
1.5 sec. 1.5 sec.
Note: Allowable range is restricted by the Accel Min Speed set-
Sets the rate (in seconds) at which the speed command
5.0 sec. 5.0 sec.
Note: Allowable range is restricted by the Accel Max Speed
Sets the rate (in seconds) that is used to slow down the vehicle
0.6 sec. 0.6 sec.
Note: Allowable range is restricted by the Decel Low Speed
Sets the rate (in seconds) that is used to slow down the vehicle
1.5 sec. 1.5 sec.
Note: Allowable range is restricted by the Decel High Speed
Sets the rate (in seconds) at which the speed command
1.5 sec. 1.5sec.
Note: Allowable range is restricted by Rev Accel Min Speed
Sets the rate (in seconds) at which the speed command
1.5 sec. 5.0 sec.
Note: Allowable range is restricted by Rev Accel Max Speed
Sets the rate (in seconds) that is used to slow down the vehicle
0.5 sec. 0.5 sec.
Note: Allowable range is restricted by Rev Decel Low Speed
Description
increases when throttle is applied with the speed limit pot is
in its maximum speed position, and the vehicle is traveling
forward. Larger values represent slower response.
ting.
increases when throttle is applied while the speed limit pot is
in its minimum speed position, and the vehicle is traveling
forward. Larger values represent slower response
setting.
when it is traveling forward at high speed and throttle is
reduced. Larger values represent slower response.
setting.
when it s traveling forward at low speed and throttle is
reduced. Larger values represent slower response.
setting.
increases when throttle is applied while the speed limit pot is
in its maximum speed position, and the vehicle is traveling in
reverse. Larger values represent slower response.
setting.
increases when throttle is applied while the speed limit pot is
in its minimum speed position, and the vehicle is traveling in
reverse. Larger values represent slower response.
setting.
when it is traveling in reverse at high speed and throttle is
reduced. Larger values represent slower response.
setting.
4-7