Table of Contents
Advertisement
GB
Safety information
IE
Safety warnings
>Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
>Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
>Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Service
>Have your power tools serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.
Drill safety warnings
> Wear ear protectors when impact drilling Exposure to
noise can cause hearing loss.
>Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
>Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
Safety instructions when using long drill bits
a) Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the bit is
06
TTB877DRH by TITAN
Advertisement
Table of Contents
