TTB877DRH by TITAN
WARNING! Only change the rotational direction when the product is
switched off and has come to a complete stop! Always ensure that the
forward / reverse rotation control is adjusted to the correct position
depending on the intended operation!
Always push the forward / reverse rotation control as far as it will go!
Do not use the product with the control switch in any other position!
> Move the forward / reverse rotation control switch (8) to the left (as seen from
the operators position) in order to use the product in a clockwise rotational
mode (Fig. 6).
> Move the forward / reverse rotation control switch (8) to the right (as seen from
the operators position) in order to use the product in anticlockwise rotational
mode (Fig. 7).
Position
8
Fig. 6
A
8
Fig. 7
A
NOTE: If you are using the product for the first time after changing the
rotational direction, a locking sound may be heard. This is normal and
does not represent a defect.
Switching on/off
Operate the product either in instant or continuous mode.
Instant mode
> Switch the product on by pressing the on/off switch (12) (Fig. 8).
> Switch the product off by releasing the on/off switch (12) (Fig. 8).
Rotational direction
Product functions
Application
drilling into material
loosen jammed drill bits
GB
GB
IE
IE
23