Table of Contents
Advertisement
GB
Before you start
IE
Setup
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely
assembled!
Drill bits
Different drill bits can be used with this product depending on the material being
worked with.
WARNING! Always use drill bits according to the intended use! For
example, never use drill bit intended for working on wood for working
on metal or vice versa!
Observe the technical requirements of this product (see section
Technical specifications) when purchasing and using drill bits
Some drill bits are very sharp and become hot during use! Handle
them carefully! Wear protective gloves when handling drill bits in order
to avoid injuries like burns and cuts!
Inserting
> Hold the keyless chuck (3) in position and turn the chuck sleeve (2) anticlockwise
until the chuck jaws (1) have opened wide enough to insert the drill bit (Fig.1).
Insert the drill bit all the way to the stop (Fig. 2).
> Hold the keyless chuck (3) in position and turn the chuck sleeve (2) clockwise
until the drill bit is properly fastened in the chuck jaws (1) (Fig. 3).
1
Fig. 1
18
2
3
Fig. 2
TTB877DRH by TITAN
Fig. 3
Advertisement
Table of Contents
