Page 3
Congratulations on your purchase of a power tool from Titan Power Tools (UK) Ltd. We want you to continue getting the best performance from it so this handbook includes information on safety, handling and care. Please retain this handbook in case you need to refer to any of the information in the future.
SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Page 5
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the DRILL DRIVER TTD127DDH & TTE128DDH...
battery terminals together may cause burns or a fire. d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Page 7
, and move to a well vented area to allow the fumes to vent to atmosphere. Caution is there is leaking liquid from the battery wear protective clothing, glasses and clothes as this can be acidic. Always disconnect battery charger and remove battery from charger when the charging is complete. DRILL DRIVER TTD127DDH & TTE128DDH...
Page 8
FOR BATTERY Always remove the battery pack from the charger immediately after re-charging is completed. When not in use, remove a charged battery pack from the charger. Do not charge a damaged battery pack. Do not charge non-rechargeable batteries. Lithium-ion and lithium polymer cells and battery packs may get hot, explode or ignite and cause serious injury if exposed to abuse conditions.
Page 9
The use of other tools will reduce the users’ total working period on this tool. Helping to minimise your vibration exposure risk. ALWAYS use sharp chisels, drills and blades DRILL DRIVER TTD127DDH & TTE128DDH...
Page 10
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate) Avoid using tools in temperatures of 10°C or less Plan your work schedule to spread any high vibration tool use across a number of days. Health Surveillance All employees should be part of an employer’s health surveillance scheme to help identity any vibration related diseases at an early stage, prevent disease progression and help employees stay in work.
Page 11
Do not dispose of batteries. Return exhausted batteries to your local collection or recycling point Always charge the battery pack between temperatures 0°C to 30°C Indoor use only Do not expose to rain or water Do not burn DRILL DRIVER TTD127DDH & TTE128DDH...
Page 12
1. KEYLESS CHUCK 2. VARIABLE CLUTCH 3. GEAR CONTROL 4. BATTERY CAPACITY INDICATOR 5. BATTERY CAPACITY INDICATOR SWITCH 6. FORWARD AND REVERSE ROTATION SELECTOR 7. SOFT GRIP HANDLE 8. BATTERY PACK LATCH 9. BATTERY PACK 10. MAGNETIC TRAY 11. ON/OFF SWITCH WITH VARIABLE SPEED CONTROL 12.
CHARGING PROCEdURE NOTE: Before using the tool, read the instruction book carefully. 1. BEFORE USING YOUR CORDLESS DRILL Your battery pack is UNCHARGED and you must charge once before use. When you charge the new battery or one which has not been used for long periods of time, it may not reach full charge until after you have discharged it fully in use and recharge it several times.
Page 15
LO (mark is 1) or HI (mark is 2) speeds. A slide switch is located on top of the drill to select either LO or HI speed. When using the drill in the LO speed range, Fig F DRILL DRIVER TTD127DDH & TTE128DDH...
Page 16
the speed will decrease and the drill will have greater power and torque. When using the drill in the HI speed range, the speed will increase and the drill will have less power and torque. WARNING: To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation or the two-speed gear train.
PROBlEM SOlUTION 1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE SWITCH? The forward and reverse switch, which is on top of the trigger, is positioned in the lock function. Unlock the forward and reverse switch putting it into the required rotation position.
This is normal and will not damage your power tool. ENvIRONMENTAl PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For further information visit www.recycle-more.co.uk DRILL DRIVER TTD127DDH & TTE128DDH...
PlUG REPlACEMENT(UK and Ireland only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: Blue – Neutral Brown – Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug,...
Declaration of Conformity We, Importer Titan Power Tools (UK) Ltd BA22 8RT Declare that the product DRILL DRIVER TTD127DDH & TTE128DDH Complies with the following Directives, 98/37/EC until December 28th 2009 and then with 2006/42/EC from 29th December 2009 Machinery Directive...