Parameter Settings - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual
Electric programmable controller for cc-link ie field network basic
Hide thumbs
Also See for MELSEC iQ-F Series:
- User manual (282 pages) ,
- Handbook (132 pages) ,
- Programming manual (128 pages)
Table of Contents
Advertisement
3.5
Parameter Settings
This section describes how to set parameters required for the programmable controller using GX Works3.
1.
In the "Navigation" window of GX Works3, select [Parameter] [FX5SCPU] [Module Parameter] [Ethernet Port].
If the "Navigation" window is not displayed, go to the menu bar, and select [View] [Docking Window]
[Navigation] to open the window.
2.
Set an IP address and a subnet mask in "Own Node Settings" of "Basic Settings".
In this manual, the following setting values are used. (For the setting values, refer to Page 11 System Configuration.)
Item
IP Address
Subnet Mask
An IP address is not set by default. When an IP address is not set, the CPU module operates with IP address
192.168.3.250.
3 PROGRAMMABLE CONTROLLER SETTINGS
25
3.5 Parameter Settings
Setting value
192.168.3.250
255.255.255.0
Advertisement
Table of Contents
