Mitsubishi Electric MELSERVO-J5 User Manual page 80

• Servo amplifier with CN2L or CN2AL
1-axis servo amplifier
CN2
CN2L
CN2
Conditions
When using a branch cable
When not using a branch
cable
*1 Encoder cables are to be fabricated by the customer. Optional cables are not available.
*2 These items should be prepared by the customer.
*3 For thermistor signal connectors, change the connection method depending on the system being used.
1 LINEAR ENCODER
78
1.7 Linear encoder PSLH041 manufactured by NIDEC SANKYO (Incremental type)
Encoder cable 2
(4)
Encoder cable 1
(1)
Branch cable
(3) SCALE
*3
THM
Branch cable Encoder cable
(3) MR-J4THCBL03M (1) MR-J3CN2 connector set
Page 94 MR- Page 80 Encoder cable 1
J4THCBL03M branch cable

(4) MR-J3CN2 connector set
Page 81 Encoder cable 2
(2)
Linear servo motor thermistor
(2)
Linear servo motor thermistor
*1
(2) Junction connector
15-pin D-SUB (female)
Linear encoder
PSLH041
Output cable
Output cable
*2
Linear encoder accessory
Cable length: 0.4 m