Evolute El40M (Absolute Position Type) - Mitsubishi Electric MELSERVO-J5 User Manual

EVOLUTE EL40M (absolute position type)

Cable structure
Prepare cables based on the following configuration diagram.
■For the linear servo motor
• Servo amplifier without CN2L or CN2AL
1-axis servo amplifier
CN2
or
Multi-axis
servo amplifier
CN2A
CN2
CN2B
*1
CN2C
Conditions
When using a branch cable
When not using a branch
cable
*1 The connection to CN2C is for the MR-J5W3-_ and MR-J5D3-_G_. The MR-J5W2-_ and MR-J5D2-_G_ do not have CN2C.
*2 Encoder cables are to be fabricated by the customer. Optional cables are not available.
*3 These items should be prepared by the customer.
*4 For thermistor signal connectors, change the connection method depending on the system being used.
1 LINEAR ENCODER
72
1.6 Linear encoder manufactured by Renishaw
Encoder cable 2
(4)
Encoder cable 1
(1)
Branch cable
(3) SCALE
*4
THM
Branch cable Encoder cable
(3) MR-J4THCBL03M (1) MR-J3CN2 connector set
Page 94 MR- Page 75 Encoder cable 1
J4THCBL03M branch cable

(4) MR-J3CN2 connector set
Page 76 Encoder cable 2
(2)
Linear servo motor thermistor
(2)
Linear servo motor thermistor
*2
(2) Junction connector
9-pin D-SUB (female)
Linear encoder
EVOLUTE EL40M
Output cable
Output cable
*3
Linear encoder accessory
Cable length: 0.5 m