Mitsubishi Electric MELSERVO-J5 User Manual page 42

• Servo amplifier with CN2L or CN2AL
1-axis servo amplifier
CN2
CN2L
Equipment required to adjust and check signals
Signal
adjustment
software
Conditions
When using an optional encoder
cable
When fabricating an encoder cable
*1 These items should be prepared by the customer.
*2 In order to adjust and check signals when installing the LIC 4193M, LIC 4195M, LIC 4197M, LIC 4199M, LIC 2197M, or LIC 2199M, a
personal computer (with USB port), signal adjustment software, and a measuring device are required. For details, contact HEIDENHAIN
K.K.
1 LINEAR ENCODER
40
1.4 Linear encoder manufactured by Heidenhain
Rotary servo motor encoder
*2
Personal
computer
Measuring device
Encoder cable
(1) Options manufactured by Heidenhain
630 856-×× _m
(2) MR-J3CN2 connector set
Page 41 Fabricating the encoder
cable
Encoder cables 1, 2
(1)
(2)
*1
(3) Junction connector
15-pin D-SUB (female)
Linear encoder
LIC 4193M/LIC 4195M/LIC 4197M/
LIC 4199M/LIC 2197M/LIC 2199M
Head cable
(3)
Head cable
Linear encoder accessory
Cable length: 1 m
*1