Mitsubishi Electric MELSERVO-J5 User Manual page 26

• Servo amplifier with CN2L or CN2AL
Equipment required to adjust and check signals
Signal
adjustment
software
Conditions
When using an optional encoder
cable
When fabricating an encoder cable
*1 These items should be prepared by the customer.
*2 In order to adjust and check signals when installing the ST743A, ST744A, or ST748A, a personal computer, signal adjustment software,
and a converter unit are required. For details, contact Mitutoyo Corporation.
1 LINEAR ENCODER
24
1.3 Linear encoder manufactured by Mitutoyo (absolute position type)
1-axis servo amplifier
CN2
CN2L
*2
Personal
computer
Converter unit
Encoder cable
(1) Options manufactured by Mitutoyo
Part No.06ACF117A: 5 m
Part No.06ACF117B: 10 m
(2) MR-J3CN2 connector set
Page 25 Encoder cable 1
Rotary servo motor encoder
Encoder cable 1
(1)
(2) (3)
*1
(3) Junction connector
15-pin D-SUB (female)
Shell: HDAB-15S
Plug case: HDA-CTH (Hirose Electric)
Linear encoder
ST743A/ST744A/ST748A
Head cable
Head cable
Linear encoder accessory
Cable length: 1 m
*1