Mitsubishi Electric MELSERVO-J5 User Manual page 49

• Servo amplifier with CN2L or CN2AL
(5)
1-axis servo amplifier
CN2
CN2L
Branch cable
CN2 (4)
Equipment required to adjust and check signals
Personal
Software for
computer
signal adjustment
Conditions Branch cable
When using an (4) MR-J4THCBL03M
optional encoder cable Page 94 MR-
J4THCBL03M branch
When fabricating an
cable
encoder cable
When not using a 
branch cable
*1 These items should be prepared by the customer.
*2 For thermistor signal connectors, change the connection method depending on the system being used.
*3 In order to adjust and check signals when installing the LIDA 483, LIDA 485, LIDA 487, LIDA 489, LIDA 287, or LIDA 289, a personal
computer (with USB port), signal adjustment software, and a measuring device are required. For details, contact HEIDENHAIN K.K.
Encoder cable 2
(3)
Encoder cable 1
(1)
(2) (3)
SCALE
Linear servo motor thermistor
*2
THM
*3
Measuring device
Encoder cable
(1) Options manufactured by Heidenhain
630 856-×× _m
(2) MR-J3CN2 connector
set
Page 49 Encoder
cable 1
(5) MR-J3CN2 connector
set
Page 50 Encoder
cable 2
Linear servo motor thermistor
Serial interface
conversion unit
Serial interface
conversion unit
*1
EIB 392M
Cable length: 0.5 m
(Heidenhain)
*1
(3) Junction connector
15-pin D-SUB (female)
1.4 Linear encoder manufactured by Heidenhain
Linear encoder
LIDA 483/LIDA 485/LIDA 487/
LIDA 489/LIDA 287/LIDA 289/
LIF 481/LIP 6081
Head cable
Head cable
Linear encoder
accessory
*1
Cable length: 3 m
1 LINEAR ENCODER
1
47