Pepperl+Fuchs OBD30M-R2000-4EP Manual page 28

2-D Laser Scanner
Operation
•
•
Version Info
•
•
•
Factory Defaults
The factory defaults for the sensor can be loaded in this menu item. To do this, you
must select "Load" in the submenu and confirm by pressing the "Enter" button.
You must restart the device to adopt all the changes.
28
I/Q Status: The four inputs/outputs are displayed at the same time in rings.
The respective input/output is indicated every 90° via points (1–4). The
respective input/output is displayed even when it is not active.
Field Status: The four fields are displayed at the same time in rings. The
respective field is indicated every 90° via points (1–4). The respective field
is displayed even when it is not active.
Firmware: The display shows the current version of the firmware.
Hardware: The display shows the current version of the hardware.
PFSDP: The display shows the current version of the Pepperl+Fuchs Scan
Data Protocol.