Table of Contents
Advertisement
2-D Laser Scanner
Operation
Address Mode
•
•
•
IP Address
The IP address to be used in the "Manual" address mode can be set in this menu
item.
Subnet Mask
The subnet mask to be used in the "Manual" address mode can be set in this
menu item.
Gateway
The gateway can be set in this subitem.
Restart
The device can be restarted in this menu item.
Note
Changing the IP configuration
Changes to the IP configuration are only applied after a restart.
The IP configuration currently used by the device is displayed in the "Ethernet
Info" menu item. If these settings differ from the configuration specified under the
"Ethernet Setup" menu item, the device must be restarted.
7.3.3
Sensor Setup Menu Item
Language
The language can be set to German or English using this menu item.
Display Mode
The display mode defines the display in normal mode when the menu is not
active. The display mode is set on a permanent basis. It is active following a
restart.
•
•
"Manual:" Enables you to manually assign the IP address, the subnet
mask, and the gateway to the device.
"DHCP:" Enables you to assign an IP address to the device from a DHCP
server (e.g., a Windows® PC).
"AutoIP:" Enables automatic detection of the device on the network.
Display off: The display goes dark as soon as the menu is exited.
Static logo: The text "Pepperl+Fuchs" is displayed.
27
Advertisement
Table of Contents
