Banner MM-TA-12B Instruction Manual page 19

MM-TA-12B Muting Module
Instruction Manual
Machine Interface
Pin Color* Function
1 Brown +24V dc
2 Orange/Black EDM#2
3 Orange EDM#1
4 White OSSD#2
5 Black OSSD#1
6 Blue 0V dc
7 Green/Yellow Earth Ground
8 Violet Mute Enable
Mute Inputs (M1 – M4)
Pin Color* Function
1 Brown +24V dc
NPN INPUT for M2/M4
2 White
(not connected M1/M3)
0V dc
3 Blue
4 Black PNP INPUT for M1/M3
(not connected M2/M4)
Shield, Earth Ground
5 Shield**
Reset Input
Pin Color* Function
1 Brown +24V dc
2 White (not connected)
3 Blue (not connected)
4 Black Reset Input
5 Shield** Shield, Earth Ground
Override Input (OVER)
Pin Color* Function
1 Brown +24V dc
2 White OVER Input B
3 Blue 0V dc
4 Black OVER Input A
5 Shield** Shield, Earth Ground
Maximum cable length (ft) versus total current draw (It) at the Machine Interface connector
0.5A 0.75A
12 AWG 1500 1000
14 AWG 960 640
16 AWG 600 400
18 AWG 375 250
20 AWG 240 160
22 AWG 150 100
NOTE: Cable length includes power (+24V dc) and return (0V dc) wires at 25°C, and is intended to ensure that adequate
power is available to the Module when the supply is operating at +24V dc-15%.
Figure 3-3. Connector pin-outs (face views) for Module connectors
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
1 7 6
5
2 8
3 4
Male, Mini-Style
1 2
5
4 3
Female, Euro-Style
1
2
5
4 3
Female, Euro-Style
1 2
5
4 3
Female, Euro-Style
1.0A 1.25A 1.5A 1.75A
750 594 500 438
480 380 320 280
300 238 200 175
188 148 125 109
120 95 80
75 59 50
Muteable Safety Stop Interface (MSSI)
Pin Color* Function
1 Gray/Black MSSI b
2 White MSSI c
3 Black MSSI a
4 Blue 0V dc
5 Brown +24V dc
6 Gray/White MSSI d
7 Green/Yellow Earth Ground
Universal Safety Stop Interface (USSI)
Pin Color* Function
1 Brown USSI b
2 White USSI c
3 Blue USSI d
4 Black USSI a
5 Shield** Shield, Earth Ground
Mute Lamp Output (ML) and Auxiliary PNP Output (AUX)
Pin Color* Function
1 Brown +24V dc
2 White Mute Lamp Output
3 Blue 0V dc
4 Black AUX PNP Output
5 Shield** Shield, Earth Ground
NOTE: Cable and wiring is low voltage; running these wires along-
side power wires, motor/servo wires, or other high-voltage
wiring can inject noise into the safeguarding system. It is
good wiring practice (and may be required by code) to iso-
late wires from high-voltage wires.
*Color code corresponds to Banner accessory QD cordsets list-
*
ed in Section 2.1.
**Pin 5 is for an optional connection for shield ground in electri-
cally noisy environments
2.0A 2.25A 2.5A
375 344 313
240 220 200
150 138 125
94 88 78
70 60 55 50
44 38 n.a. n.a.
System Installation
6 1
7
5 2
4 3
Female, Mini-Style
1 2
5
4 3
Female, Euro-Style
1
2
5
4 3
Female, Euro-Style
2.75A 3.0A 3.25A
281 250 219
180 160 140
113 100 88
70 63 55
45 40 35
n.a. n.a. n.a.