Hdd Installation (Optional); Figure 3-2: Ppc2-Cxxx-Ehl Hdd Bracket Retention Screws - IEI Technology PPC2-C-EHL Series User Manual
Panel pc equips intel celeron j6412 processor, on-board 8gb memory, hdmi display output, dual 2.5g ethernet port, one m.2 m key & one m.2 b key expansion slots, 12~24v dc input, anti-glare and anti-uv 10-point touchscreen
Table of Contents
Advertisement
PPC2-Cxxx-EHL Series Panel PC
3.6 HDD Installation (Optional)
To install a 2.5" HDD into the PPC2-Cxxx-EHL Series (model of 12" or above), please
f ollow the steps below:
Step 1:
Remove the back cover. See Section 3.5.
Step 2:
Remove the HDD bracket from the PPC2-Cxxx-EHL Series. The HDD
bracket is secured on the panel PC with four retention screws (Figure 3-2).
Remove the four retention screws and disconnect the SATA and SATA power
cables. Lift the bracket off the panel PC.
Figure 3-2: PPC2-Cxxx-EHL HDD Bracket Retention Screws
Step 3:
Secure the hard drive to the bracket. Secure the hard drive to the bracket with
four retention screws (Figure 3-3: HDD Retention Screws).
Page 29
Advertisement
Table of Contents
