High-Speed Data Communications - NEC e606 Product Manual

• Settings
• Accessories
What is a Task?
A task is a set of operations. There are groups of functions that share the same task. You cannot use two or
more functions in a "task" at the same time. The following shows functions that belong to the same task:
• Application: Message (Text message/Multimedia message), Browser, Java™, PPP (connecting a PC to
the Internet), SAT (Subscriber Identity Module Application Toolkit)
• Settings: Contacts, Settings, Accessories, Multimedia, User data
• Data communication: Data transfer between e606 and the USIM card or a PC.
The more tasks you are carrying out simultaneously, the more 'pages' you will see on the multi-task icon;
it could show 2 or 3 pages depending on the amount of simultaneous multi-tasking being performed by
the e606.
To Start/Switch Task During Another Task
To
1 Go back to the standby screen
2 Start another task
3 Switch to another task

High-Speed Data Communications

The e606 supports high-speed data communications for your PC. Just connect the attached USB cable and
install the contents of the CD-ROM to your PC. The e606 also supports Bluetooth™ technology to connect to
a Bluetooth enabled PC. Refer to External Connect on page 60 for details.
Please check that your operator allows use of your e606 as a modem to connect to the internet.
Advanced Features
Do this
Press the MENU key for a few seconds.
Dial the phone number to make a call.
Press the SK1 (Message) key to start the message function.
Press the SK2 (Contact) key or Up key to start the contact list
function.
Press the key to access to the 3 sites.
Press the MENU key to display Task Menu.
Press and hold the MENU key.
(available in 3G mode only)
-45-