To/From Pc - NEC e606 Product Manual

Useful Tips
• To quit the transfer, press the SK2 (Quit) key on data transfer screen.

To/From PC

(press the" Menu" key
By connecting the e606 and a PC with an USB cable, data can be copied between the e606 and the PC.
Between e606 and the PC, the following data can be transferred: contact list data (vcf), calendars (vcs),
ringtunes (mid), video clips (mp4), audio files (aac/wma), image files (jpg, gif, png, bmp), and voice data
(amr).
The transferred files from the PC can be used in e606.
For details on the data types and size, refer to the relevant manuals on PC data transfer application. This
operation can only be controlled from the data transfer software installed in a PC.
An image file must be 352 x 288 pixels or smaller in size to be displayed on Viewer.
Basic Operations
The basic operation for transferring data between the e606 and the PC is shown below:
To Transfer Data between the Phone and a PC
This operation can only be controlled from the PC side.
To
1 Connect the e606 and the PC
2 Start data transfer
3 Display To/From PC
4 Copy data between
the e606 and the PC
Data Transfer
→ select "Data Transfer" icon
Do this
Insert an USB cable to the power connector of the e606 and a
USB port of the PC.
Press the MENU key and select Data Transfer.
Select To/From PC.
To/From PC is displayed.
Use data transfer software installed in the PC, to copy data
between the e606 and the PC.
-123-
→ select "To/From PC")