High-Speed Data Communications - NEC e808n Product Manual

To Start/Switch Task During Another Task
To
1 Go back to the standby screen
2 Start another task
3 Switch to another task

High-Speed Data Communications

The e808 supports high-speed data communications for your PC. Just connect the attached USB cable and
install the contents of the CD-ROM to your PC. Refer to External Connect on page 56 for details.
Please check that your operator allows use of your e808 as a modem to connect to the internet.
Installation and e808 Settings
For detailed information on PC installation, refer to "e808 Software Manual", in pdf format on your e808
"Tools and Utilities" CD-ROM.
When you use the USB cable, install driver and WP-TCP software in the CD-ROM. Follow the installation
wizard.
What is a WP-TCP software?
This software optimises the registry setting of your PC. If you want to have the best PC communication
performance through the USB cable, this software is recommended.
Settings for PC Internet Connection
General steps for PC settings are described by the following. For the details of these settings, please refer to
the PC documentation.
Advanced Features
Do this
Press the MENU key for a few seconds.
Dial the phone number to make a call.
Press the SK1 (Message) key to start the message function.
Press the SK2 (Contact) key or Up key to start the contact list
function.
Press the key to access to the 3 sites.
Press the MENU key to display Task Menu.
Press and hold the MENU key.
(available in 3G mode only)
-43-