NEC e606 Product Manual page 132

To
5 Select the direction
6 Select the search
search
and display the search result
7 Select the contact entries to
move or copy from the
search
result
8 Start moving/copying
Data Transfer
Do this
Select the direction from Phone to USIM (the data is transferred to the
USIM card from the phone) or USIM to Phone.
type, Select search type from Alphabetical List, Name Search, Phone No.
Search, Address Search, Memory No. List, Memory No. Search, and
Category List.
To move:
Select the title.
To copy:
To select one or more entries: Select the title and press the SK1
(Select) key. Multiple titles can be selected. To cancel the selection,
select the title and press the SK1 (Cancel) key.
To select all entries: Press the SK2 (Submenu) key and select Select
All. To cancel the selection, press the SK2 (Submenu) key and select
Delete All.
To move:
Press the SK1 (Move) key.
The selected contact entries are moved to the USIM card or the e606
memory.
To copy:
Press the SK2 (Submenu) key and select Start Copy [1 item] (the first
phone number and email address registered in the selected contact
entries are copied) or Start Copy [all] (all phone number and email
address registered in the selected contact entries are copied).
The selected contact entries are copied to the USIM card or the e606
memory.
Note : Here, only one phone number or one email address can be stored
in a USIM contact entry. Therefore, if Start Copy [all] is selected,
up to 7 entries with the same name will be created in the USIM
contact, depending on the number of phone numbers/email
addresses in the original phone contact entry.
-121-