Vt Settings - NEC e606 Product Manual

Item
Pause Dial Entry
Select ALS Line
(available when USIM
supports Alternate
Line Service)

VT Settings

(press the "MENU" key
VT Settings allows you to change various settings for video telephony.
Item
Camera
Picture Position
Mirror Image
Description
Edits a string of the keypad characters (128 characters max.) for
pause dialling. This function enables sending out of numbers
while calling with pauses inserted.
For example, after dialing a number with the touch tone service,
you can send out the numbers entered beforehand.
XX-XXXX-XXXX (the service centre answers) (press the SK1
(Send) key) XXXX#()
Pause dial entry function is useful for sending messages to a
pager, etc. Only keypad characters (0-9, Q and #) and pause
(press and hold the # key: displayed as p) can be input. A pause
at the beginning or repeated pauses cannot be registered. A
pause at the end is deleted when registered. Registered pause
dial entry can only be used while calling. Sent out pause dial
entries are not saved in the Calls Made list.
Selects which phone number to use when making a call, from
ALS 1 and ALS 2. This setting does not affect any received calls
or communications. When the battery is removed from e606, this
setting is reset and ALS 1 is set as default.
→
select "Settings" icon
Description
Turns on/off the camera function.
On: The camera captures the image. The captured image will be
displayed on the receiver's handset and your captured image
window.
Off: The camera does not capture the image. There will be no
image captured and sent on a video call, and a blue screen will
be displayed on the receiver's handset and your captured image
window.
The position of the image captured by e606 on the display
screen. Select from Normal and Lower.
When this function is turned on, the captured image will be
displayed in reverse.
-82-
→
select "VT Settings")
Settings