NEC e606 Product Manual page 57

Installation and e606 Settings
For detailed information on PC installation, refer to "e606 Software Manual", in pdf format on your e606
"Tools and Utilities" CD-ROM.
When you use the USB cable, install driver and WP-TCP software in the CD-ROM. Follow the installation
wizard. When you use Bluetooth communication, this installation is not necessary.
What is a WP-TCP software?
This software optimises the registry setting of your PC. If you want to have the best PC communication
performance through the USB cable, this software is recommended.
Settings for PC Internet Connection
General steps for PC settings are described below. For the details of these settings, please refer to the PC
documentation.
e606 Settings for USB
To
1 Check cable connection
2 Turn e606 power on
3 Select External Connect
4 Select PPP connection type
e606 Settings for Bluetooth
To
1 Select External Connect
2 Select PPP connection type
Do this
Check the cable connection between PC and e606.
Refer to Power On/Off on page 8 for details.
Press the MENU key and select External Connect.
Select USB.
Network connection standby screen is displayed.
Do this
Press the MENU key, select External Connect.
Select Bluetooth.
Bluetooth Stndby is displayed.
-46-
Advanced Features