NEC e606 Product Manual page 88

To
5 Set the addressee
6 Input the subject
7 Input the message text
8 Send the message
Useful Tips
Useful tips for replying and forwarding are shown below:
To Reply to a Received Message
Tips
Quoting from the original message
when replying
Replying to a message with multiple
addressees
Message
Do this
Select To, input the address and press the Enter key.
Note : To set the addressee from the Contacts, refer to Setting
the addressee from the contact entries on page 69.
If necessary, select Subject and edit the title (50 characters
max.).
If necessary, select message, edit the message text and press
the Enter key.
Press the SK1 (Send) key. The message is sent and saved in
the Sent Items.
You can reply to a message with quotes from the original
message.
Select the message and press the Enter key to display the
message text. Press the SK2 (Submenu) key and select
Quoted reply. The original message with quoted reply mark is
inserted in the Text.
Note : When the sender's address is an email address for
Video message, you cannot reply to it using a Text
message. As a result, the reply message type Text
Message will grey out.
You can reply to a message with multiple addressees.
Select the message and press the Enter key to display the
message text. Press the SK2 (Submenu) key, move the
highlight to Reply or Quoted reply, and press the SK1 (To All)
key. A maximum of 30 addresses can be set for this reply
message.
-77-