Making And Receiving A Video Call; To Make A Video Call To A Video Capable Phone; To Make A Video Call To A Pc With Webcam; To Receive A Video Call - NEC 338 Product Manual

Making and Receiving a Video Call

Available in 3G coverage only
For further information on changing the default settings for a video call, refer to Video calls on page 61.

To Make a Video Call to a Video Capable phone

To
1 Enter a phone number
2 Start the video call
3 Talk and focus the camera
4 End the call

To Make a Video Call to a PC with Webcam

This service is network dependent. Please contact 3 for further details.
To
1 Select the email address you want to
contact
2 Start the video call

To Receive a Video Call

To
1 Receive a video call
2 Answer the call
Making and Receiving Calls
Do This
Enter the phone number, using the keypad, contacts list or the call logs.
For further information on Call Logs, refer to page 25.
Press the SK1 (Vid. call).
When the other party responds, hold the camera towards you and talk.
Adjust the camera position if necessary.
Handsfree is set by default for video calls.
Press the End key.
Do This
Select the email address from the contact list, the Incoming calls/Missed
calls list, etc.
Press the SK1 (Vid. call).
The video call may take some time to connect. Please be patient. The
connection time also depends on how quickly the other party
answers the call.
Do This
The phone indicates that you are receiving a video call.
Press the Send key or SK1 (Answer) to answer and send the captured
image from the active camera to the other party.
To answer the video call without sending your image, press the
SK2 (No video). The alternative photo is sent to the other party.
-22-