Table of Contents
Advertisement
Withhold ID
The feature allows you to withhold your ID when making a call to others.
•
From the main menu, select
•
Press
Left Softkey
to withhold for all calls and
Security
The security settings protects your phone from improper and unauthorized use.
These confidential numbers should be kept in a safe place for future access, if required.
You may be required to enter one of the following security codes as shown below. When the phone prompts you for one of these codes, use the
keypad to enter the appropriate number and press
•
PIN code (provided by your network to protect your SIM card if it is stolen)
•
PIN2 code (provided by your network for charge information and FDN services protection)
•
PUK/PUK2 code (respective personal unblocking code in case you forget the PIN/PUK code)
•
Phone code (provided along with the phone and have to be entered at the first security setting)
If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
If the PIN2 code is entered incorrectly 3 times, you will need to contact your service provider for a PUK2 code.
The PIN codes and security codes are between 4 to 8 digits.
Change PINs
The PIN will be requested most of the times when the phone is switched on. This feature can be deactivated, at the risk of unauthorized usage of your
phone. Some mobile service providers do not permit the deactivation of this control.
You can set up your phone to require your
incoming calls. If you entered your
mobile service provider for a
Your phone supports advanced features (e.g. FDN) that may require a PIN2 code to be entered before they can be accessed or
modified.
To activate PIN
•
From the main menu, select
will have to key in a
PIN code
>
>
Settings
Calls
Withhold ID
Right Softkey
Left Softkey
entered when the phone is switched on before the phone can be used and receive any
PIN code
incorrectly for more than three times (not necessarily in the same session), you will have to contact your
PIN code
to unblock your SIM card.
PUK code
>
. Highlight
Settings
Security
for activation. A tick in the check box beside the option indicates that
.
to cancel.
to confirm.
and press
Left Softkey
PIN activate
to toggle PIN activate Enable/Disable. You
has been activated.
PIN activate
37
Advertisement
Table of Contents
