Making And Receiving A Video Call; To Make A Video Call To A; Video Capable Handset - NEC e808n Product Manual

To
Receive a third call
Making and Receiving a Video Call (available in 3G mode only)
With e808, you can make a video call to a video capable handset - the other party must have a video capable
handset. You can also make a video call to a PC via an email address - the other party must have a PC
equipped with a video calling application and a webcam. (Refer to VT Settings on page 98 for details.)
When making/receiving a video call, the start switch on the stereo headset will not work. Therefore, when
the outgoing/incoming call is a video call, open the handset and call/receive by using the Start key or
SK1 key. You can distinguish incoming video calls from voice calls by setting different ringtune,
illumination or vibrate function.
Basic Operations
The possible operations making and receiving a video call are shown below:
To Make a Video Call to a Video Capable Handset
To
1 Input the phone number
2 Ensure you have the stereo headset
plugged in.
Do This
When a third call is received while already there are two calls
on line, the current call and the call held, you can receive the
third call only if you end one of the current/held calls.
Press the SK2 (Submenu) key and select the appropriate
option to end the current/held call.
Do This
Input the phone number using the keypad, or select the phone
number from the Calls Made/Received lists. Refer to page 20
for how to make a video call to an entry in your contact list.
Note : To correct mistakes, press the CLR key briefly to delete
the last number, or press and hold the CLR key to delete
all numbers.
-18-
Making and Receiving Calls