Serial Cable Installation - Pyramid TimeTrax mobile Reference Manual

SERIAL CABLE INSTALLATION

A
Two available options for connecting the TimeTrax Mobile to your central PC
(fig. A).
PARTS REFERENCE
A. Central PC
B. RJ45 to DB9 Adapter (PN 41400)
C. USB to RS232 Adapter (PN 41685)
D. 7' RJ45 Flat Cable (PN 41539)
OPTION 1: PC has an available Serial 9-pin (COM) port.
Connect the 7' RJ45 cable (fig. D) to the RJ45/DB9 adapter (fig. B).
This will then connect to the back of your PC. (fig. A)
OPTION 2: PC only has a USB port. **Important** Make sure
the TimeTrax software is pre-installed prior to any hardware
and cable connections.
Connect the 7' RJ45 cable (fig. D) to the RJ45/DB9 adapter (fig. B) and
then connect the RS232/USB adapter (fig. C) to the back of your PC (fig. A).
Note: If you purchased SQL (page 49) see that section of this manual for
additional installation instructions.
B
OPTION 1
OPTION 2
C
B
E. TimeTrax Mobile
(PN TTMOBILE)
F. AC Power Supply (included in shipment)
G. Standard 115v Wall Power Outlet
TIME & ATTENDANCE SYSTEM
E
D
D
CLEAR
F
G
5