Cable Installation; Parts Reference - Pyramid TimeTrax mobile Quick Start Manual

PYRAMID TIMETRAX MOBILE SERIAL
You are now finished installing the Pyramid TimeTrax software onto your
PC. We highly recommend restarting your computer before you proceed.
NOTE: Do not continue using the software until the terminal(s) is
completely connected with all cables and power supply.

CABLE INSTALLATION

PARTS REFERENCE

Central PC
B
RJ45 to 9-pin (DB9) Adapter (included)
C
USB to RS232 Adapter (included)
D
7' RJ45 Communication Cable (included)
TWO AVAILABLE OPTIONS FOR CONNECTING THE PYRAMID
TIMETRAX SERIAL/USB TERMINAL TO YOUR CENTRAL PC
OPTION 1: PC HAS an available open Serial 9-pin (COM)
port. Connect the AC power supply (Fig. F) to a standard wall power
outlet (Fig. G) and to the TimeTrax terminal (Fig. E). Connect the white
RJ45 communication cable (Fig. D) to the RJ45/DB9 adapter (Fig. B).
This will then connect to the back of your PC. (Fig. A)
A
B
C
D
OPTION 1
OPTION 2
D
B
E
TimeTrax Terminal (included)
F
AC Power Supply (included)
G
Wall Power Outlet
2
QUICK START GUIDE
When installation is
complete, click FINISH
and Restart your
computer.
E
CLEAR
G
F