PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE INSTALLING THE SOFTWARE NOTE: Prior to installing the software, it is recommended that you disable all anti-virus and firewall software so it does not interfere with the installation. It can be turned back on immediately after the installation.
FINISH and Restart your computer. You are now finished installing the Pyramid TimeTrax software onto your PC. We highly recommend restarting your computer before you proceed. NOTE: Do not continue using the software until the terminal(s) is completely connected with all cables and power supply.
15-minutes of non-use allowing longer periods between recharges. Pyramid recommends frequent recharging. When the TimeTrax Mobile is in Sleep Mode and an employee needs to swipe, the On/Off switch needs to be turned off and then back on to bring the unit back into ready mode.
Page 6
Click the “Reference Guide” ICON to open the electronic PDF file of the Software Users Guide. You will see complete steps and full directions on how to use the Pyramid TimeTrax Software. The guide is always available on the software screen toolbar. In addition, you can print this file out or save it to your PCs hard drive.
QUICK START GUIDE USING THE TIME RECORDER The Pyramid TimeTrax Mobile Time Recorder is powered by battery and can easily be moved from job site to job site so your Time Recorder is where your employees are! For employees traveling between multiple...