Using The Car Charger; Downloading Punches; Using Employee Cards - Pyramid TimeTrax mobile Reference Manual

TIMETRAX MOBILE

USING THE CAR CHARGER

The Pyramid TimeTrax Mobile offers an Automotive Adapter/Car Charger
(Pyramid Part Number 42180) as an optional accessory to charge your battery on
the go. Simply plug one end of the car charger into the TimeTrax Mobile charge
port and the other end into the car's 12-volt accessory power outlet/cigarette
lighter for an instant charge. As with a 115-volt electrical outlet charge, Pyramid
recommends frequent recharging.

USING EMPLOYEE CARDS

1. Insert the employee card at the top of
the slot on the right side of the time
recorder. The card must be held with the
magnetic stripe to the right and the card
firmly in the slot.
2. Rapidly pull the card down through the
slot. If the employee number is success-
fully read, the time recorder will beep
and the card number will be displayed
briefly on the screen.
3. Keypad entry of employee numbers can
be done in lieu of employee cards.

DOWNLOADING PUNCHES

Single TimeTrax
Mobile Unit: Connect
the hardware as shown
in the diagram on page
5. Once connected,
open software and from
the Initial Communi-
cations Form, verify
that the recorders are
found and select the
Download Punches box.
4
Successful
Connection
Select
Download
Punches