Video Window Setup; Image Adjustment - Eclipse Security ECL-IP3D50MV Manual

2 Zoom in
3 Snapshot
4 Triple snap
5 Record
6 Easy focus
7 Audio
output
Bidirectional
8
talk
9 Help

2.4 Video Window Setup

The interface is shown as in

2.4.1 Image Adjustment


When the video is in the original status, click it you can
select any zone to zoom in. In the non-original status,
you can drag the zoom-in zone in specified range. Right
click mouse to restore previous status.

Click it; you can use the middle button of the mouse to
zoom in/out the video size.
Click on the button to snapshot, save picture to path in Ch
5.1.2.5.
Click it, system can snap at 1f/s. All images are saved to path
in Ch 5.1.2.5.
Click it, system can record. All images are saved to path in Ch
5.1.2.5.
Click it, you can see there are two parameters on the preview
video：AF Peak and AF Max.
AF Peak: It is to display the video definition during the focus
process.
AF Max: It is the most suitable value for the video definition.
The close the AF Peak and AF Max is, the better the focus
effect is.
Turn on or off audio when you are monitoring.
Click it to start or end bidirectional talk.
Click it to open help file.
Figure 2- 5
.
1 2
Figure 2- 5
3 4 5 6
9