Rudder Pushrod Installation - Seagull Models YAKOVLEV YAK 3 Assembly Manual

3) hread one clevis and M2 lock nut on
to each elevator control rod. hread the
horns on until they are lush with the
ends of the control rods.
4) Elevator and rudder pushrods assem-
bly as pictures below.
M2 clevis.
Fuel tubing.
M2 lock nut.
8mm
Elevator pushrod.
Hex nut.
Pen.
M2 clevis.
8mm
RUDDER PUSHROD
INSTALLATION.
Repeat steps as same as steps done for
elevator.
M2 lock nut.
8mm
Nylon Snap Keeper.
M2 clevis.
25