Adjustment Of F-R Lever Linkage; Adjustment - Sakai R2-4 Shop Manual

INSPECTION AND ADJUSTMENT

11. ADJUSTMENT OF F-R LEVER LINkAGE

11-1. Adjustment

• In cases such as propulsion pump is replaced, control cable
is replaced or F-R lever does not move smoothly, make an
adjustment in accordance with procedure described below.
• "N" position of F-R lever (1) is positioned by notches.
① Set F-R lever in "N".
② Attach both ends of control cable (2).
Specified dimension a : 170 mm (6.69 in.)
★
Specified dimension b : 172 mm (6.77 in.)
★
③ Confirm the strokes of propulsion pump control lever (3).
Specified dimension c : 22 mm (0.9 in.)
★
9-018
A A
A A
N N
2 2
VIEW A-A VIEW A-A
3 3
R2H-2-09018 R2H-2-09018
1 1
R2H-2-09019 R2H-2-09019
2 2
R2H-2-09015 R2H-2-09015