9. MEASUREMENT OF PROPULSION MOTOR CASE
PRESSURE
9-1. Measurement of Propulsion Motor (F)
•
Oil temperature during measurement : 50
① Disconnect hose (1) and (2) from propulsion motor. Attach
pressure gauge through adapter ⓟ .
•
Hose (1)
•
Hose (2)
•
Adapter ⓟ
•
Pressure gauge : 0 to 5 MPa (0 to 725 psi)
② Confirm that F-R lever is "N".
③ Apply parking brake by pressing parking brake switch
button.
④ Set speed change switch to "
⑤ Start the engine and set throttle lever to "FULL".
⑥ Establish a condition in which machine propulsion load
becomes maximum. (Pressure does not build up unless
propulsion load is applied.)
⑦ With propulsion load at maximum, measure pressure
when speed change switch is "
lever is "N", "F", and "R", respectively.
Allowable motor case pressure
★
°C (122
± 5
: Propulsion motor (F,R)
: Propulsion motor (F,L)
: G1/2
".
" and "
: 0.3 MPa (43.5 psi) or less
°F)
± 9
1
1
2
2
" and F-R
INSPECTION AND ADJUSTMENT
p
p
R2-4-09010
R2-4-09010
PG002004
PG002004
9-013